Blum Clip Top 110 degree hinge, self close, inset
$2.61
Blum Clip Top 110 degree hinge, self close, inset
$2.61
Self close concealed hinge for frameless cabinets, 110 degree opening, inset, 45mm bore pattern.
Ships in 2 days
Request a quotePrefer a human? We reply within one business day
Description
Blum Clip Top 110 degree hinge, self close, inset, Blum cabinet hardware, sold each. Self close concealed hinge for frameless cabinets, 110 degree opening, inset, 45mm bore pattern.
Helpful guides
Shop more cabinet hinges or build a custom drawer box.
About this hinge
A concealed hinge sits in a cup bored into the back of the door and clips onto a mounting plate on the cabinet, so nothing shows from outside, and the Blum Clip Top 110 degree hinge here comes with a self closing spring that pulls the door shut from the last part of its travel. Sold each for this Clip Top 110 degree hinge; a standard door takes two, tall or heavy doors take more.
Cabinet and overlay
This 110 degree Clip Top hinge is built for frameless cabinets; it clips onto a Clip wing or in-line mounting plate rather than screwing straight to the door frame. It is the inset version, so the door sits inside the opening, flush with the cabinet face, the look of traditional furniture and framed inset kitchens. The bore pattern in the door is 45mm on part 71T3750. The plate for part 71T3750 is a separate purchase in cabinet hinges, chosen by height to set the reveal. If you want soft close on this Clip Top 110 degree door, the same hinge is made with BLUMOTION, or you can add a BLUMOTION add on unit to an inset door.
Where this version fits
Picking the wrong hinge in this family usually means the wrong overlay, not the wrong brand; part 71T3750 is inset, which means the door sits inside the opening, flush with the cabinet face, the look of traditional furniture and framed inset kitchens, and only one of them will give the right reveal on a given cabinet. Check the overlay against the cabinet drawing before ordering a second part 71T3750.
Installation notes
Once the 45mm cup is bored and part 71T3750 is in the door, the plate goes on the cabinet and the two clip together with a tab that lets the door come back off later for painting or adjustment. Side to side, depth, and height all adjust from part 71T3750 and the plate, so a whole run of inset doors lines up without redrilling. Drawer slide types covers what is usually happening behind part 71T3750, in the drawers.
Pair it with drawer boxes
We build the drawer boxes that go behind a Clip Top 110 degree door in our Las Vegas shop: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) for a pull out or a bank of drawers, or a standard size drawer box off the shelf. Built in USA. When the cabinet is getting new hinges and new drawers at once, How to install a replacement drawer box and Drawer side thickness cover the drawer side of fitting part 71T3750.
Questions
Can I mix part 71T3750 with a different brand’s mounting plate?
No, match the plate brand to part 71T3750’s own hinge brand: Clip and Clip Top hinges, including part 71T3750, only clip onto Blum Clip plates.
Does the 110 degree Clip Top hinge come with fixing screws?
Fixing screws for part 71T3750 are typically included with the hinge and plate, and our own hinge and drawer slide screws for part 71T3750 in cabinet screws cover spares or a different length.
Additional information
| Weight | 0.48 lbs |
|---|---|
| Dimensions | 5 × 3.5 × 2 in |
| Type | Hinge |
| Opening angle | 110° |
| Closing | Self close |
| Overlay | Inset |
| Mounting | Frameless |
| Series | Clip Top |
