3/4″ x 8 Truss Head Hinge & Drawer Slide Screw Nickel, Case of 8000

Description

3/4″ x 8 Truss Head Hinge & Drawer Slide Screw Nickel, Case of 8000, Würth cabinet hardware, sold as a case of 8000. Hinge / drawer slide install.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet screws or build a custom drawer box.

What this screw is

The 3/4″ x 8 screw, part 11704857, is a hinge and drawer slide screw, the short fastener that fixes slide members, mounting plates, and hinge bases to cabinet and drawer sides. Size 3/4″ x 8, truss head, nickel finish. The 3/4″ x 8 screw, part 11704857, is sold by the case of 8000, which is how shops buy it. Würth is the maker.

Where to use it

The 3/4″ x 8 screw, part 11704857,: use it to fix slide members and mounting plates, where the wide head bears on the slotted hole. The nickel finish on the 3/4″ x 8 screw (part 11704857) matches nickel hinges and plates. Screw length on the 3/4″ x 8 screw (part 11704857) matters against drawer side thickness: a screw that is too long comes through a 1/2 inch side, which is why Drawer side thickness lists side thicknesses next to the hardware each one takes.

Driving it

Match the bit to the head on the 3/4″ x 8 screw (part 11704857), drive it snug, and stop there; plywood and particleboard strip out fast once a screw is overdriven. On a slide, start with the horizontal slots on the 3/4″ x 8 screw (part 11704857), check the drawer runs true, then add the fixed holes last. How to install a replacement drawer box covers mounting a box on side mount slides and How to install undermount drawer slides covers undermount runners if that is the job the 3/4″ x 8 screw (part 11704857) is for.

Pair it with

Every drawer box we ship from our Las Vegas shop is ready for hardware like the 3/4″ x 8 screw (part 11704857): a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade), or a standard size drawer box. Built in USA. Hardware that pairs with the 3/4″ x 8 screw (part 11704857) is in side mount slides and undermount slides, hinges and plates in cabinet hinges, and the rest of the screws in cabinet screws.

Questions

What head does the 3/4″ x 8 screw (part 11704857) have?

Truss head. The wide head bears on a slotted slide hole rather than countersinking flush.

Can I use the 3/4″ x 8 screw (part 11704857) on a drawer slide and a hinge plate both?

Check the head and length on the 3/4″ x 8 screw (part 11704857) against each part first; a screw sized for a hinge plate is not always right for a slide member, even when both take a similar looking screw.