1-1/4″ x 8 Flat Head Assembly Screw Coarse Thread Zinc, Box of 9000

Description

1-1/4″ x 8 Flat Head Assembly Screw Coarse Thread Zinc, Box of 9000, Würth cabinet hardware, sold as a box of 9000. Drawer box / cabinet assembly.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet screws or build a custom drawer box.

What this screw is

The 1-1/4″ x 8 screw, part 11313462, is an assembly screw for drawer box and cabinet carcass work, coarse threaded to bite in plywood and particleboard. Size 1-1/4″ x 8, flat head, zinc finish. The 1-1/4″ x 8 screw, part 11313462, is sold by the box of 9000, which is how shops buy it. Würth is the maker.

Where to use it

The 1-1/4″ x 8 screw, part 11313462,: use it for drawer box and cabinet assembly in plywood, Baltic Birch and particleboard. The zinc finish on the 1-1/4″ x 8 screw (part 11313462) is the standard shop finish and matches zinc slides. Screw length on the 1-1/4″ x 8 screw (part 11313462) matters against drawer side thickness: a screw that is too long comes through a 1/2 inch side, which is why Drawer side thickness lists side thicknesses next to the hardware each one takes.

Driving it

Match the bit to the head on the 1-1/4″ x 8 screw (part 11313462), drive it snug, and stop there; plywood and particleboard strip out fast once a screw is overdriven. On a slide, start with the horizontal slots on the 1-1/4″ x 8 screw (part 11313462), check the drawer runs true, then add the fixed holes last. How to install a replacement drawer box covers mounting a box on side mount slides and How to install undermount drawer slides covers undermount runners if that is the job the 1-1/4″ x 8 screw (part 11313462) is for.

Pair it with

Every drawer box we ship from our Las Vegas shop is ready for hardware like the 1-1/4″ x 8 screw (part 11313462): a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade), or a standard size drawer box. Built in USA. Hardware that pairs with the 1-1/4″ x 8 screw (part 11313462) is in side mount slides and undermount slides, hinges and plates in cabinet hinges, and the rest of the screws in cabinet screws.

Questions

What head does the 1-1/4″ x 8 screw (part 11313462) have?

Flat head. It countersinks flush with the surface once driven.

Can I use the 1-1/4″ x 8 screw (part 11313462) on a drawer slide and a hinge plate both?

Check the head and length on the 1-1/4″ x 8 screw (part 11313462) against each part first; a screw sized for a hinge plate is not always right for a slide member, even when both take a similar looking screw.