Würth Pro Value C80 110 degree hinge, soft close, full overlay

Description

Würth Pro Value C80 110 degree hinge, soft close, full overlay, Würth cabinet hardware, sold each. Value soft close concealed hinge for frameless cabinets, 110 degree opening, full overlay, 45mm bore pattern.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

This is a Würth Pro Value concealed hinge with a 110 degree opening, with soft close built into the hinge itself, so the door decelerates on the last few degrees and closes without a slam. Concealed hinges like part PROH110FOSFT are what frameless cabinets use: the cup goes in the door, the arm clips to a plate on the cabinet, and the door is adjusted from the hinge after it is hung, sold each.

Cabinet and overlay

Part PROH110FOSFT: Full overlay means the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel. This 110 degree Pro Value hinge is the full overlay version, built for frameless cabinets, on a Würth Pro wing mounting plate. Door boring for this Pro Value is the 45mm pattern. Plates for part PROH110FOSFT are sold separately by height in cabinet hinges; the plate, not the hinge, is what sets the reveal.

Where this version fits

Full overlay, the look part PROH110FOSFT is built for, is the standard look on a frameless kitchen: each door covers its own cabinet side almost edge to edge, with just a sliver of reveal between neighbors. It is the version to reach for on part PROH110FOSFT unless the cabinet drawing specifically calls for half overlay or inset.

Installation notes

Bore the 45mm cup in the door, press or screw the Pro Value hinge in, screw the mounting plate to the cabinet, then clip the hinge arm onto the plate; it releases with a tab for taking the door off later. Adjust side to side, depth, and height on part PROH110FOSFT from the hinge and plate so the gaps match the neighboring doors. Behind part PROH110FOSFT, the drawers and pull outs are our department; Drawer slide types shows what slides each kind of cabinet uses.

Pair it with drawer boxes

A 110 degree Pro Value full overlay door usually has a drawer or pull out somewhere behind it, and we build those in our Las Vegas shop: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade), or a standard size drawer box off the shelf. Built in USA. How to install a replacement drawer box and Drawer side thickness cover that side of the job if both are changing at once with part PROH110FOSFT.

Questions

What bore does the door need for part PROH110FOSFT?

The 45mm cup bore pattern, for part PROH110FOSFT.

Does part PROH110FOSFT, the 110 degree Pro Value hinge, include the mounting plate?

No, part PROH110FOSFT does not include the plate; mounting plates are separate so you can choose the plate height and fixing that suits the cabinet, and like every Pro Value hinge, part PROH110FOSFT clips onto the Würth Pro mounting plates.