Blum Legrabox and Movento L3 Tip-On unit and trigger, light gray, 15 to 21 inch

Description

Blum Legrabox and Movento L3 Tip-On unit and trigger, light gray, 15 to 21 inch, Blum cabinet hardware, sold as a set. Tip-On push to open unit and trigger pair for 15 to 21 inch Legrabox or Movento drawers, 88 lb capacity.

Helpful guides

• Drawer boxes for Blum undermount slides
• How to install undermount drawer slides
• How to adjust undermount soft close drawer slides

Shop more Blum accessories or build a custom drawer box.

What it is

Part BT60L7540 puts touch to open on a drawer: press the front, and the runner itself pushes the box out. It is sized for Legrabox and wooden Movento drawers, 15 to 21 inch runners, 88 lb, light gray finish, sold as a set.

What it fits

It changes the drawer box. Blum’s TIP-ON BLUMOTION for Movento needs the rear notches widened to 125 mm (4-15/16 inch) minimum to clear the units, sets a minimum inside drawer width of 11-1/16 inches (281 mm), and cannot be used with rear brackets or the 298.7600 depth adjuster; Blum also says not to fit bumpers. The unit is picked by drawer length and load, and on wide drawers a synchronization rod links the left and right units so they fire together. Tandem 563 with BLUMOTION has no Tip-On option, so plan on Movento for touch to open on a wood box.

Installation notes

The unit clips onto the runner and the trigger fits to the box; Blum’s template sets the gap so the front closes without latching hard against the cabinet. Tell us the box is for Tip-On when you order so we cut the 125 mm notch instead of the standard one. Drawer boxes for Blum undermount slides: 563 Tandem and Movento has the Movento rules and How to install undermount drawer slides has the hanging sequence.

Pair it with

Handleless only works if the drawers behind the doors match part BT60L7540, so we build those too: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) from our Las Vegas shop, Built in USA, notched for Movento and cut with the wider Tip-On notch on request. Blum accessories has the rest of what part BT60L7540 works with.

Questions

Does the Legrabox and Movento L3 Tip-On unit and trigger, change the drawer box?

Yes, on Movento. The rear notches widen to 125 mm minimum and the inside width must be at least 11-1/16 inches. Tell us it is Tip-On when you order and we cut it that way.

Can I use a rear bracket with the Legrabox and Movento L3 Tip-On unit and trigger,?

No, Blum says rear brackets and the 298.7600 depth adjuster cannot be used with TIP-ON BLUMOTION on Movento.