Blum Clip Top blind corner 95 degree hinge, self close, inset

Description

Blum Clip Top blind corner 95 degree hinge, self close, inset, Blum cabinet hardware, sold each. Blind corner self close concealed hinge, 95 degree opening, inset, 45mm bore pattern.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

A concealed hinge sits in a cup bored into the back of the door and clips onto a mounting plate on the cabinet, so nothing shows from outside, and the Blum Clip Top 95 degree hinge here comes with a self closing spring that pulls the door shut from the last part of its travel. It is the version for blind corner cabinets. Sold each for this Clip Top 95 degree hinge; a standard door takes two, tall or heavy doors take more.

Cabinet and overlay

This 95 degree Clip Top hinge is built for frameless cabinets; it clips onto a Clip wing or in-line mounting plate rather than screwing straight to the door frame. It is the inset version, so the door sits inside the opening, flush with the cabinet face, the look of traditional furniture and framed inset kitchens. The bore pattern in the door is 45mm on part 79T9580. The plate for part 79T9580 is a separate purchase in cabinet hinges, chosen by height to set the reveal. If you want soft close on this Clip Top 95 degree door, the same hinge is made with BLUMOTION, or you can add a BLUMOTION add on unit to an inset door.

Where this version fits

Picking the wrong hinge in this family usually means the wrong overlay, not the wrong brand; part 79T9580 is inset, which means the door sits inside the opening, flush with the cabinet face, the look of traditional furniture and framed inset kitchens, and only one of them will give the right reveal on a given cabinet. This version is also built specifically for blind corner cabinets.

Installation notes

Once the 45mm cup is bored and part 79T9580 is in the door, the plate goes on the cabinet and the two clip together with a tab that lets the door come back off later for painting or adjustment. Side to side, depth, and height all adjust from part 79T9580 and the plate, so a whole run of inset doors lines up without redrilling. Drawer slide types covers what is usually happening behind part 79T9580, in the drawers.

Pair it with drawer boxes

We build the drawer boxes that go behind a Clip Top 95 degree door in our Las Vegas shop: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) for a pull out or a bank of drawers, or a standard size drawer box off the shelf. Built in USA. When the cabinet is getting new hinges and new drawers at once, How to install a replacement drawer box and Drawer side thickness cover the drawer side of fitting part 79T9580.

Questions

What does inset mean on the Clip Top line?

The door sits inside the opening, flush with the cabinet face, the look of traditional furniture and framed inset kitchens. That is the inset version, part 79T9580.

How many Clip Top 95 degree hinges (part 79T9580) does one door need?

Two of part 79T9580 on a standard height door, and tall or heavy doors, and most pantry and oven cabinet doors, usually take three of them.