Blum Clip Top 110 degree plus hinge with BLUMOTION soft close, full overlay

Description

Blum Clip Top 110 degree plus hinge with BLUMOTION soft close, full overlay, Blum cabinet hardware, sold each. Soft close concealed hinge for frameless cabinets, 110 degree plus opening, full overlay, 45mm bore pattern.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

A concealed hinge sits in a cup bored into the back of the door and clips onto a mounting plate on the cabinet, so nothing shows from outside, and the Blum Clip Top 110 degree hinge here comes with BLUMOTION soft close built into the hinge itself, so the door decelerates on the last few degrees and closes without a slam. Sold each for this Clip Top 110 degree hinge; a standard door takes two, tall or heavy doors take more.

Cabinet and overlay

This 110 degree Clip Top hinge is built for frameless cabinets; it clips onto a Clip wing or in-line mounting plate rather than screwing straight to the door frame. It is the full overlay version, so the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel. The bore pattern in the door is 45mm on part 73B3550. The plate for part 73B3550 is a separate purchase in cabinet hinges, chosen by height to set the reveal.

Where this version fits

Picking the wrong hinge in this family usually means the wrong overlay, not the wrong brand; part 73B3550 is full overlay, which means the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel, and only one of them will give the right reveal on a given cabinet. Check the overlay against the cabinet drawing before ordering a second part 73B3550.

Installation notes

Once the 45mm cup is bored and part 73B3550 is in the door, the plate goes on the cabinet and the two clip together with a tab that lets the door come back off later for painting or adjustment. Side to side, depth, and height all adjust from part 73B3550 and the plate, so a whole run of full overlay doors lines up without redrilling. Drawer slide types covers what is usually happening behind part 73B3550, in the drawers.

Pair it with drawer boxes

We build the drawer boxes that go behind a Clip Top 110 degree door in our Las Vegas shop: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) for a pull out or a bank of drawers, or a standard size drawer box off the shelf. Built in USA. When the cabinet is getting new hinges and new drawers at once, How to install a replacement drawer box and Drawer side thickness cover the drawer side of fitting part 73B3550.

Questions

What bore does the door need for part 73B3550?

The 45mm cup bore pattern, for part 73B3550.

Does part 73B3550, the 110 degree Clip Top hinge, include the mounting plate?

No, part 73B3550 does not include the plate; mounting plates are separate so you can choose the plate height and fixing that suits the cabinet, and like every Clip and Clip Top hinge, part 73B3550 clips onto any Clip mounting plate.