Blum 20 mm drawer front adjusting screw, natural

Description

Blum 20 mm drawer front adjusting screw, natural, Blum cabinet hardware, sold each. Nylon 20 mm drawer front adjuster connector giving 5 mm height and side to side front adjustment on four sided drawers.

Helpful guides

• Drawer boxes for Blum undermount slides
• How to install undermount drawer slides
• How to adjust undermount soft close drawer slides

Shop more Blum accessories or build a custom drawer box.

What it does

A drawer front adjuster is the fitting that lets you move an applied drawer front after it is screwed on, so a bank of fronts can be lined up without redrilling. This is the Blum nylon version for four sided wood drawers. Sold each.

What it fits

It fits four sided wood drawer boxes with an applied front, on any slide. The adjuster sits in a hole in the drawer front and the screw passes through the box front into it; loosen, move, tighten. It is the difference between a bank of drawers with even reveals and one where every front was drilled a hair off, and it is what production shops use because it makes the final alignment a two minute job at the install rather than a rebuild. Blum’s marking gauge and boring template for these adjusters are in Blum accessories.

Installation notes

Bore the front for the adjuster, knock it in, screw the box to the front through it, then loosen slightly and slide the front until the reveals match. Line up the fronts before the final tighten. For the rest of the fitting sequence see How to install a replacement drawer box.

Pair it with

We build the box to go with it in our Las Vegas shop: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade), sized for the slide you name. Built in USA.

Questions

Which drawers does it fit?

Four sided wood drawer boxes with a separate applied front, on any slide type.

Do I need a special tool to install it?

No, it is bored into the front and knocked in, then the box screws to it through the front like any applied front fastener.