Blum Tip-On synchronization adaptor, light gray

Description

Blum Tip-On synchronization adaptor, light gray, Blum cabinet hardware, sold each. Synchronization adaptor used in pairs to connect the Tip-On synchronization rod so both units fire evenly on wide drawers.

Helpful guides

• Drawer boxes for Blum undermount slides
• How to install undermount drawer slides
• How to adjust undermount soft close drawer slides

Shop more Blum accessories or build a custom drawer box.

What it is

On a wide drawer a single Tip-On unit fires unevenly and the drawer can rack, so Blum links the left and right units with a synchronization rod. Part BT60.000D is the adaptor that joins the rod to the unit; you need one on each side, sold each.

What it fits

Part BT60.000D adaptors are used in pairs, one on each unit, and the rod snaps between them. It belongs with the Tip-On units in Blum accessories, and with a drawer box notched for Tip-On.

Installation notes

Fit the units, cut part BT60.000D to length, press it into the adaptors on both units, and test that both sides release together. The Movento box rules, including the wider Tip-On notch, are in Drawer boxes for Blum undermount slides: 563 Tandem and Movento.

Pair it with

For a handleless kitchen with part BT60.000D, the drawers matter as much as the doors. We build custom size dovetail drawer boxes in Baltic Birch or Hard Maple (Select Grade) in our Las Vegas shop, notched for Movento and, when you tell us it is Tip-On, cut with the wider notch for part BT60.000D. Built in USA. Every Blum part we stock alongside part BT60.000D is in Blum accessories.

Questions

Does the Tip-On synchronization adaptor, light gray need a synchronization rod?

Only on a wide drawer, to link the left and right units so they fire together.

Does the Tip-On synchronization adaptor, light gray change the drawer box?

Yes, on Movento. The rear notches widen to 125 mm minimum and the inside width must be at least 11-1/16 inches. Tell us it is Tip-On when you order and we cut it that way.