Blum Tandem 563 and 569 right hand standard locking device

Description

Blum Tandem 563 and 569 right hand standard locking device, Blum cabinet hardware, sold each. Front fixing bracket that locks a Tandem 563 or 569 undermount drawer to the right runner, no side adjustment.

Helpful guides

• Drawer boxes for Blum undermount slides
• How to install undermount drawer slides
• How to adjust undermount soft close drawer slides

Shop more Blum accessories or build a custom drawer box.

What a front locking device does

Without a front locking device an undermount box just rests on the runners with nothing holding the front down; part BT51.1801R, this Blum clip, is the part that locks it. It is built for Blum Tandem 563 and 569 runners, the right hand half of the pair, sold as the right hand device, sold each; a drawer takes one of these and one left hand device.

What it fits

Match the device to the runner stamp, not just the brand: part BT51.1801R is for Blum Tandem 563 and 569 runners. It adjusts height adjustment only, no side adjustment. Tilt correction is not part of part BT51.1801R.

When to use this one

Where part BT51.1801R earns its place: the basic no adjustment device, and the one that fits drawers too narrow for the T51.1901. It works in face frame and frameless cabinets alike, because the cabinet side of the job is handled by the runner and its rear bracket, not the clip.

Installing and adjusting it

Press part BT51.1801R into its pre bored holes before the box goes on the runners, not after; it clicks into place and then the box lowers onto the runner hooks and the extended device locks down. How to install undermount drawer slides covers that sequence for part BT51.1801R, and How to adjust undermount soft close drawer slides covers the height, side to side adjusters once the drawer is hanging. The pre bore itself is part of our free notch and drill prep, so part BT51.1801R presses straight in.

Pair it with a notched box

We drill every notched box to take part T51.1801R whether or not we are the ones pressing it on. Order No Clips on the custom drawer box configurator and fit it yourself, which takes seconds once the box is on the bench. Built in USA, Baltic Birch or Hard Maple (Select Grade), for part T51.1801R.

Questions

Can I fit the T51.1801R myself, or does it have to come installed?

Either way. The T51.1801R presses into the pre bored holes by hand in a few seconds once the box is on the bench.

What does part number T51.1801R mean?

It is Blum’s own catalog number for this exact device; order by that number and we match it to the right runner automatically when you choose the runner on the configurator.