Blum drawer front adjuster marking gauge

Description

Blum drawer front adjuster marking gauge, Blum cabinet hardware, sold each. Marks the center holes for knock in drawer front adjusters on wooden four sided drawers.

Helpful guides

• Drawer boxes for Blum undermount slides
• How to install undermount drawer slides
• How to adjust undermount soft close drawer slides

Shop more Blum accessories or build a custom drawer box.

What this template is

Part B65.2950 is a Blum shop jig. It exists so a shop can drill the same holes part B65.2950 locates on every box without laying them out by hand, and it pays for itself the first time a batch of drawers all hang straight. Sold each.

Who it is for

Part B65.2950 is for shops cutting their own drawer boxes for Blum Tandem and Movento runners. Drawer front adjusters are knock in fittings for four sided wood drawers; the gauge marks where they go. If you buy the box from us you do not need part B65.2950: we drill the hook hole and the locking device pre bore free on every notched box.

Using it

Set part B65.2950 against the box corner or panel the way Blum’s instructions show, drill with the stops already set, and repeat for the next box; that repeatability is the whole point of a jig like this. Drawer boxes for Blum undermount slides: 563 Tandem and Movento documents the hole positions part B65.2950 produces, and How to install undermount drawer slides covers hanging the box once they are drilled.

Or let us drill the box

For shops that would rather skip part B65.2950 and buy the box, our custom size dovetail drawer box arrives notched and drilled to the Blum drawing with the clips pressed on for $5.99, in Baltic Birch or Hard Maple (Select Grade) from our Las Vegas shop, Built in USA. Trade cut lists, including orders using part B65.2950, get tier pricing through the trade portal, and the Undermount drawer slide guide lists every runner we prep for.

Questions

Is a trade cut list priced differently than ordering boxes one at a time?

Yes, trade accounts get tier pricing on cut lists through the trade portal rather than the single box price.

Is the B65.2950 reusable, or is it a one time jig?

Reusable. Part B65.2950 is a shop fixture, not a consumable; the whole point is drilling the same holes the same way on every box after the first.