Blum Clip Top positive angle 110 degree hinge, self close, overlay

Description

Blum Clip Top positive angle 110 degree hinge, self close, overlay, Blum cabinet hardware, sold each. Positive angle self close concealed hinge, 110 degree opening, overlay, 45mm boring pattern.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

Blum builds this Clip Top 110 degree hinge with a self closing spring that pulls the door shut from the last part of its travel. The version here is made for positive angle applications. Like every concealed hinge in the Clip Top line, part 79A9496BT sinks its cup into the back of the door and clips its arm to a plate screwed to the cabinet, so none of the hardware shows with the door shut, and it is sold each.

Cabinet and overlay

Cabinet fit for part 79A9496BT, the 110 degree Clip Top: frameless cabinets, clipped onto a Clip wing or in-line mounting plate, the full overlay version, which means the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel. If you want soft close on this Clip Top 110 degree door, the same hinge is made with BLUMOTION, or you can add a BLUMOTION add on unit to an inset door. Mounting plates for part 79A9496BT are sold separately in cabinet hinges and set the door reveal by their height; pick the plate to suit the overlay you are after.

Where this version fits

Blum sells part 79A9496BT across a range of opening angles and overlays so a shop can match the exact cup, cabinet, and door combination rather than forcing one hinge to do every job. Part 79A9496BT opens to 110 degree, and it is built for positive angle applications.

Installation notes

Hanging this 110 degree Clip Top door is quick: cup in the door, plate on the cabinet, clip the two together, then set the reveal with the adjusters. Do the plates for part 79A9496BT with the same screws you use for slides; our hinge and drawer slide screws are in cabinet screws. For the drawers behind part 79A9496BT, Drawer slide types explains side mount, undermount, and bottom mount hardware.

Pair it with drawer boxes

Part 79A9496BT handles the door; we handle what is behind it. Our Las Vegas shop builds a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) for the drawers and pull outs that sit behind a door on part 79A9496BT, or a standard size drawer box off the shelf. Built in USA, and shipped alongside part 79A9496BT in the same order if you need it.

Questions

Can I mix part 79A9496BT with a different brand’s mounting plate?

No, match the plate brand to part 79A9496BT’s own hinge brand: Clip and Clip Top hinges, including part 79A9496BT, only clip onto Blum Clip plates.

Does the 110 degree Clip Top hinge come with fixing screws?

Fixing screws for part 79A9496BT are typically included with the hinge and plate, and our own hinge and drawer slide screws for part 79A9496BT in cabinet screws cover spares or a different length.