Blum Clip Top negative angle 110 degree hinge with BLUMOTION, full overlay

Description

Blum Clip Top negative angle 110 degree hinge with BLUMOTION, full overlay, Blum cabinet hardware, sold each. Negative angle soft close concealed hinge, 110 degree opening, full overlay, 45mm boring pattern.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

A concealed hinge sits in a cup bored into the back of the door and clips onto a mounting plate on the cabinet, so nothing shows from outside, and the Blum Clip Top 110 degree hinge here comes with BLUMOTION soft close built into the hinge itself, so the door decelerates on the last few degrees and closes without a slam. It is the version for negative angle applications. Sold each for this Clip Top 110 degree hinge; a standard door takes two, tall or heavy doors take more.

Cabinet and overlay

This 110 degree Clip Top hinge is built for frameless cabinets; it clips onto a Clip wing or in-line mounting plate rather than screwing straight to the door frame. It is the full overlay version, so the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel. The plate for part 79B3490 is a separate purchase in cabinet hinges, chosen by height to set the reveal.

Where this version fits

Picking the wrong hinge in this family usually means the wrong overlay, not the wrong brand; part 79B3490 is full overlay, which means the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel, and only one of them will give the right reveal on a given cabinet. This version is also built specifically for negative angle applications.

Installation notes

Once the cup is bored and part 79B3490 is in the door, the plate goes on the cabinet and the two clip together with a tab that lets the door come back off later for painting or adjustment. Side to side, depth, and height all adjust from part 79B3490 and the plate, so a whole run of full overlay doors lines up without redrilling. Drawer slide types covers what is usually happening behind part 79B3490, in the drawers.

Pair it with drawer boxes

We build the drawer boxes that go behind a Clip Top 110 degree door in our Las Vegas shop: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) for a pull out or a bank of drawers, or a standard size drawer box off the shelf. Built in USA. When the cabinet is getting new hinges and new drawers at once, How to install a replacement drawer box and Drawer side thickness cover the drawer side of fitting part 79B3490.

Questions

What makes the negative angle applications version different from the standard Clip Top hinge?

It is built for negative angle applications, not for a standard flat door front.

Can I mix part 79B3490 with a different brand’s mounting plate?

No, match the plate brand to part 79B3490’s own hinge brand: Clip and Clip Top hinges, including part 79B3490, only clip onto Blum Clip plates.