Blum Clip Top blind corner 95 degree hinge, soft close, inset

Description

Blum Clip Top blind corner 95 degree hinge, soft close, inset, Blum cabinet hardware, sold each. Blind corner soft close concealed hinge, 95 degree opening, inset, 45mm bore pattern.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

A concealed hinge sits in a cup bored into the back of the door and clips onto a mounting plate on the cabinet, so nothing shows from outside, and the Blum Clip Top 95 degree hinge here comes with BLUMOTION soft close built into the hinge itself, so the door decelerates on the last few degrees and closes without a slam. It is the version for blind corner cabinets. Sold each for this Clip Top 95 degree hinge; a standard door takes two, tall or heavy doors take more.

Cabinet and overlay

This 95 degree Clip Top hinge is built for frameless cabinets; it clips onto a Clip wing or in-line mounting plate rather than screwing straight to the door frame. It is the inset version, so the door sits inside the opening, flush with the cabinet face, the look of traditional furniture and framed inset kitchens. The bore pattern in the door is 45mm on part 79B9580. The plate for part 79B9580 is a separate purchase in cabinet hinges, chosen by height to set the reveal.

Where this version fits

Picking the wrong hinge in this family usually means the wrong overlay, not the wrong brand; part 79B9580 is inset, which means the door sits inside the opening, flush with the cabinet face, the look of traditional furniture and framed inset kitchens, and only one of them will give the right reveal on a given cabinet. This version is also built specifically for blind corner cabinets.

Installation notes

Once the 45mm cup is bored and part 79B9580 is in the door, the plate goes on the cabinet and the two clip together with a tab that lets the door come back off later for painting or adjustment. Side to side, depth, and height all adjust from part 79B9580 and the plate, so a whole run of inset doors lines up without redrilling. Drawer slide types covers what is usually happening behind part 79B9580, in the drawers.

Pair it with drawer boxes

We build the drawer boxes that go behind a Clip Top 95 degree door in our Las Vegas shop: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) for a pull out or a bank of drawers, or a standard size drawer box off the shelf. Built in USA. When the cabinet is getting new hinges and new drawers at once, How to install a replacement drawer box and Drawer side thickness cover the drawer side of fitting part 79B9580.

Questions

Does part 79B9580, the 95 degree Clip Top hinge, include the mounting plate?

No, part 79B9580 does not include the plate; mounting plates are separate so you can choose the plate height and fixing that suits the cabinet, and like every Clip and Clip Top hinge, part 79B9580 clips onto any Clip mounting plate.

Is the soft close built into the Clip Top hinge?

Yes, on this 95 degree inset version. BLUMOTION is integrated in the hinge, so no separate soft close unit is needed.