Blum Clip Top 95 degree hinge, free swinging, full overlay

Description

Blum Clip Top 95 degree hinge, free swinging, full overlay, Blum cabinet hardware, sold each. Free swinging concealed hinge for frameless cabinets, 95 degree opening, full overlay, for use with Tip-On.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

Blum builds this Clip Top 95 degree hinge free swinging, with no self close spring, which is the version you want behind a Tip-On push to open unit. Like every concealed hinge in the Clip Top line, part 70T9580.TL sinks its cup into the back of the door and clips its arm to a plate screwed to the cabinet, so none of the hardware shows with the door shut, and it is sold each.

Cabinet and overlay

Cabinet fit for part 70T9580.TL, the 95 degree Clip Top: frameless cabinets, clipped onto a Clip wing or in-line mounting plate, the full overlay version, which means the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel. Mounting plates for part 70T9580.TL are sold separately in cabinet hinges and set the door reveal by their height; pick the plate to suit the overlay you are after.

Where this version fits

Blum sells part 70T9580.TL across a range of opening angles and overlays so a shop can match the exact cup, cabinet, and door combination rather than forcing one hinge to do every job. Part 70T9580.TL opens to 95 degree, and it is the full overlay version, meaning the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel.

Installation notes

Hanging this 95 degree Clip Top door is quick: cup in the door, plate on the cabinet, clip the two together, then set the reveal with the adjusters. Do the plates for part 70T9580.TL with the same screws you use for slides; our hinge and drawer slide screws are in cabinet screws. For the drawers behind part 70T9580.TL, Drawer slide types explains side mount, undermount, and bottom mount hardware.

Pair it with drawer boxes

Part 70T9580.TL handles the door; we handle what is behind it. Our Las Vegas shop builds a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) for the drawers and pull outs that sit behind a door on part 70T9580.TL, or a standard size drawer box off the shelf. Built in USA, and shipped alongside part 70T9580.TL in the same order if you need it.

Questions

How many Clip Top 95 degree hinges (part 70T9580.TL) does one door need?

Two of part 70T9580.TL on a standard height door, and tall or heavy doors, and most pantry and oven cabinet doors, usually take three of them.

Does the Clip Top line come in more than one opening angle?

Yes, Blum cuts the Clip Top line across several opening angles and overlays; this one is 95 degree, full overlay.