Blum Clip Top 110 degree hinge with BLUMOTION soft close, inset

Description

Blum Clip Top 110 degree hinge with BLUMOTION soft close, inset, Blum cabinet hardware, sold each. Soft close concealed hinge for frameless cabinets, 110 degree opening, inset, 45mm bore pattern.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

This is a Blum Clip Top concealed hinge with a 110 degree opening, with BLUMOTION soft close built into the hinge itself, so the door decelerates on the last few degrees and closes without a slam. Concealed hinges like part 71B3790 are what frameless cabinets use: the cup goes in the door, the arm clips to a plate on the cabinet, and the door is adjusted from the hinge after it is hung, sold each.

Cabinet and overlay

Part 71B3790: Inset means the door sits inside the opening, flush with the cabinet face, the look of traditional furniture and framed inset kitchens. This 110 degree Clip Top hinge is the inset version, built for frameless cabinets, on a Clip wing or in-line mounting plate. Door boring for this Clip Top is the 45mm pattern. Plates for part 71B3790 are sold separately by height in cabinet hinges; the plate, not the hinge, is what sets the reveal.

Where this version fits

Inset doors are the fussiest to hang well, because the reveal around all four sides has to match. Part 71B3790 gives you side to side, depth, and height adjustment after the door is hung, which is what makes a bank of inset doors line up without redrilling every cup.

Installation notes

Bore the 45mm cup in the door, press or screw the Clip Top hinge in, screw the mounting plate to the cabinet, then clip the hinge arm onto the plate; it releases with a tab for taking the door off later. Adjust side to side, depth, and height on part 71B3790 from the hinge and plate so the gaps match the neighboring doors. Behind part 71B3790, the drawers and pull outs are our department; Drawer slide types shows what slides each kind of cabinet uses.

Pair it with drawer boxes

A 110 degree Clip Top inset door usually has a drawer or pull out somewhere behind it, and we build those in our Las Vegas shop: a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade), or a standard size drawer box off the shelf. Built in USA. How to install a replacement drawer box and Drawer side thickness cover that side of the job if both are changing at once with part 71B3790.

Questions

What bore does the door need for part 71B3790?

The 45mm cup bore pattern, for part 71B3790.

Does part 71B3790, the 110 degree Clip Top hinge, include the mounting plate?

No, part 71B3790 does not include the plate; mounting plates are separate so you can choose the plate height and fixing that suits the cabinet, and like every Clip and Clip Top hinge, part 71B3790 clips onto any Clip mounting plate.