Blum Clip Top 110 degree hinge with BLUMOTION soft close, full overlay

Description

Blum Clip Top 110 degree hinge with BLUMOTION soft close, full overlay, Blum cabinet hardware, sold each. Soft close concealed hinge for frameless cabinets, 110 degree opening, full overlay, 45mm bore pattern.

Helpful guides

• How to install a replacement drawer box
• How to measure a drawer box

Shop more cabinet hinges or build a custom drawer box.

About this hinge

Blum builds this Clip Top 110 degree hinge with BLUMOTION soft close built into the hinge itself, so the door decelerates on the last few degrees and closes without a slam. Like every concealed hinge in the Clip Top line, part 71B3590 sinks its cup into the back of the door and clips its arm to a plate screwed to the cabinet, so none of the hardware shows with the door shut, and it is sold each.

Cabinet and overlay

Cabinet fit for part 71B3590, the 110 degree Clip Top: frameless cabinets, clipped onto a Clip wing or in-line mounting plate, the full overlay version, which means the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel, with a 45mm bore pattern in the door. Mounting plates for part 71B3590 are sold separately in cabinet hinges and set the door reveal by their height; pick the plate to suit the overlay you are after.

Where this version fits

Blum sells part 71B3590 across a range of opening angles and overlays so a shop can match the exact cup, cabinet, and door combination rather than forcing one hinge to do every job. Part 71B3590 opens to 110 degree, and it is the full overlay version, meaning the door covers the cabinet side or partition almost completely, the usual choice for frameless cabinets with one door per side panel.

Installation notes

Hanging this 110 degree Clip Top door is quick: cup in the door, plate on the cabinet, clip the two together, then set the reveal with the adjusters. Do the plates for part 71B3590 with the same screws you use for slides; our hinge and drawer slide screws are in cabinet screws. For the drawers behind part 71B3590, Drawer slide types explains side mount, undermount, and bottom mount hardware.

Pair it with drawer boxes

Part 71B3590 handles the door; we handle what is behind it. Our Las Vegas shop builds a custom size dovetail drawer box in Baltic Birch or Hard Maple (Select Grade) for the drawers and pull outs that sit behind a door on part 71B3590, or a standard size drawer box off the shelf. Built in USA, and shipped alongside part 71B3590 in the same order if you need it.

Questions

Can I mix part 71B3590 with a different brand’s mounting plate?

No, match the plate brand to part 71B3590’s own hinge brand: Clip and Clip Top hinges, including part 71B3590, only clip onto Blum Clip plates.

Does the 110 degree Clip Top hinge come with fixing screws?

Fixing screws for part 71B3590 are typically included with the hinge and plate, and our own hinge and drawer slide screws for part 71B3590 in cabinet screws cover spares or a different length.